Bobrick B6999 Surface-Mounted Toilet Tissue Dispenser with Hoods for Two Rolls

Bobrick B-6999 Surface-Mounted Toilet Tissue Dispenser with Hoods for Two Rolls

Bright Polished Stainless Steel Surface-Mounted Toilet Tissue Dispenser With Hoods For Two Rolls

MATERIALS:
Shell and Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction with four
countersunk mounting holes.
Support Posts (4) — Heavy-duty cast zamak with chrome-plated finish.
Hoods (2) — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. Hoods hinged to shell.
Spindles (2) — Chrome-plated plastic equipped with heavy-duty internal springs.
Designer's Note: Theft-resistant toilet tissue spindles, which are removable only with special key provided, are available as an
optional accessory. To specify, add suffix .60 to model number. Example: B-6999.60.

INSTALLATION:
Mount unit on wall or partition with four sheet-metal screws, furnished by manufacturer, at points indicated by an S.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nuts, and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8"
(3mm) toggle bolts or expansion bolts.

SPECIFICATION:
Surface-mounted dual-roll toilet tissue dispenser shall be type-304 stainless steel with __________ (insert one: bright
polished or satin) finish. Shell and flange shall be 22 gauge (6.8mm) and have drawn, one-piece, seamless construction. Unit
shall be equipped with 18-gauge (1.2mm) hoods hinged to shell. *Spindles shall be chrome-plated plastic with heavy-duty
internal springs.