Always Free Shipping to Continental US on all products at ProDryers.com!
The Designer Eclipse by Bobrick features a White Vitreous Enamel 16-gauge steel cover with automatic activation and is surface mounted for virtually any application.
Contemporary Design
No touch Operation
Vandal Resistant
Surface Mount
10 Year Warranty
Features:
Cover — One-piece, deep-drawn, 16-gauge (1.6mm) thick steel finished in high-gloss, acid-resistant vitreous enamel or bright polished chrome-plated finish. Cover is secured to mounting base by a retaining bracket and to the air inlet/outlet grille by a single concealed locking screw
Air Inlet/Outlet Grille — Vandal-resistant, pressure die-cast aluminium. Includes infrared sensor and operational graphics. Fixed to the mounting base by two screws and to the cover by one screw
Mounting Base — 16-gauge (1.6mm) thick plated-steel with three 1/4" (6mm) diameter mounting holes and one 7/8" (22mm) diameter hole for electrical supply wiring
Fan — Dynamically balanced, single inlet, directs air flow in a wide band through heating element at 105 cfm
Motor — Universal, 1/10 hp, 6200 rpm with sealed ball bearing at drive shaft end and self-lubricating sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch
Heating Element — Coiled nickel-chrome wire is mounted on mica formers and equipped with automatic thermal-overload switch. Black, injection molded element housing is mounted on the fan inlet, heats air without hot spots—inaccessible to vandals
Electronic Control — Infrared automatic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across sensor lens. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
Limited warranty: motor brushes for 3 years; all other parts for 10 years.
Installation: Automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor.
Phone: 888-50-DRYER | Fax: 734-943-5906 | Email: CustomerService@ProDryers.com
Category Five Technologies, Inc. | 39201 Schoolcraft Road | Suite B7 | Livonia, MI 48150
The experts in Dyson Airblade hand dryers, Xlerator hand dryers, and all other major brands...
advanced search >> view cart >> checkout >> amount in cart:
$0.00
lost your password?
