Don't forget, FREE Shipping to lower 48 states on all
of our products at ProDryers.com
Nova 5 hand dryers are available in surface
mounting with an optional recessing kit. The push button model is available with
an adjustable timing feature which may be set at 15, 22, 26, 30, 36, 40, 80, 90,
120, 150 or 160 seconds.
Features
Low amperage, quiet induction motor
Motor is brushless, so no need for brush replacement
Durable and vandal resistant.
Dryers available in surface mounted or can be recessed with a kit.
Push button models are available with adjustable dry timing
Swivel nozzle to dry hands and face
Nozzle shipped in the swivel position and can be locked to fixed position in the
field
Infrared sensor activation available
Sound level of 74dB
Architectural Spec's
Nova 5 Model hand dryer shall be manufactured by or for Nova Dryers® to include
a one-piece cover constructed of .09” thick die cast aluminum finished in
brushed chrome plating or epoxy coating. Dryers shall be fitted with 360º
revolving die cast aluminum nozzles finished in bright chrome plating.
Surface-mounted covers shall be fastened by two flathead, recessed
tamper-resistant bolts to a heavy-gauge steel wall plate, which in turn shall be
fastened to the wall or a wall box by four concealed mounting bolts. (For
recessed dryers only: A steel wall box shall be furnished into which a complete
base assembly shall be mounted). The dryer shall be equipped with 30 air intake
slots. The fan shall be protected by an aluminum die cast grating fixed into the
blower housing. The entire mechanism shall be internally grounded throughout.
The motor shall be brushless, 1/10 H.P., 3200 RPM, thermally protected. The fan
shall be a large single inlet centrifugal type contained in an aluminum die cast
housing. It shall deliver 148 cubic feet per minute of air volume (4700 LFM) and
shall be mounted directly on the motor shaft. The heating element of nichrome
wire shall be mounted on the air intake. It shall be protected by an automatic
resetting circuit breaker (25 AMP) which shall open whenever the air flow is cut
off and shall close when the flow of air is resumed. The element shall produce
an air temperature of 142° F at a 72° F ambient room temperature outlet. The
dryer shall be equipped with an infrared sensor which will allow the dryer to
start automatically when hands are placed underneath the air nozzle, and to stop
automatically when the hands are removed. For pushbutton dryers, timer shall be
micro-chip based and microswitch activated. It shall be adjustable to allow for
the required time cycle setting. Nova Dryers® shall be listed under
reexamination service of Underwriters Laboratories, Inc.
Phone: 888-50-DRYER | Fax: 734-943-5906 | Email: CustomerService@ProDryers.com
Category Five Technologies, Inc. | 39201 Schoolcraft Road | Suite B7 | Livonia, MI 48150
The experts in Dyson Airblade hand dryers, Xlerator hand dryers, and all other major brands...
advanced search >> view cart >> checkout >> amount in cart:
$0.00
lost your password?
